"Our system is governed by the ICAO directives in its annex 14 article 5.1.1.3. and FAA directives, specification L-807 (AC 150/5345-27C) for 12-foot wind cones."

​

AVAILABLE SIZES: 18, 24 and 36 inches

​

ROTATING FRAME : made of galvanized iron tube, it constitutes a robust structure, to provide the weather vane effect, keeping the initial part of the sleeve open; the assembly rotates freely on bearings.

​

SLEEVE (WindSock) :  standard sleeves  they are in orange color although the client can opt for Orange - White fringed sleeve

​

EXTERIOR LIGHTING SYSTEM (OPTIONAL) : Made up of a support tube with a junction box at the top, to which four steel arms are fixed, ending in lamp holders. PAR38 lamps have a power of 80W for airports and heliports respectively, 220V, E27 base, 2,000 hours of life.

​

OBSTACLE LIGHTING (OPTIONAL) : ( only for the wind indicator version with lighting ) a simple obstacle light, long life LED type, is mounted on top of the wind indicator  and low power consumption  in 220-240V,  

​

POST WITH FOLDING BASE:  Made of galvanized steel tube, complete with anchor base on steel plate.

In said base there is a main bolt that also allows the indicator to be lowered for easy and safe maintenance of the lighting system and the replacement of the sleeve.

A stand is supplied.  consisting of a post with a base to prevent the indicator from touching the ground and can be folded back into position  original after maintenance.

​

FEEDING  OF CURRENT:  220V AC single-phase, 50Hz, with ground connection included. Distributed by a connection box fixed to the indicator pole or mast

They are powered with low voltage, in 12V   24V   36V   48V DC

and solar powered

​

GROUND MOUNTING: The wind indicator must be mounted to the ground on a suitable concrete base with embedded anchor bolts, also  supplied by TECNIAERO

​